In Naypyidaw, Myanmar, Naing Steel is a reputable producer and supplier of high-quality NACE plates. For use in extremely corrosive environments, our NACE-certified steel plates are designed to satisfy the exacting requirements established by the National Association of Corrosion Engineers (NACE). These plates are perfect for the petrochemical, offshore, and oil and gas sectors because of their unique design, which prevents sulfide stress corrosion and hydrogen-induced cracking (HIC). Naing Steel guarantees superior quality, longevity, and adherence to global standards, offering customers dependable steel solutions that perform remarkable under the most trying circumstances.
SA 516 GR.60/70N NACE Plates are pressure vessel plates with high strength that are suited for application in severe environments, especially in hydrogen sulfide-exposed industries. The plates adhere to NACE MR 0103/0175 standards to provide superior sulfide stress cracking resistance. They have Carbon (≤0.28%), Manganese (0.79-1.30%), Silicon (0.13-0.45%), Phosphorus (≤0.025%) and Sulfur (≤0.015%) which offer better toughness and durability. Normalized for better mechanical properties, these plates are extensively utilized in the oil and gas, petrochemical, and power generation sectors.
| Grade | ASME SA 516 GR.60/70N Boiler Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| 0.18 | 0.4 | 0.95/1.50 | 0.015 | 0.008 | 0.02 (Min) | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
| BS1501-224-490A/B | EN10028 P355GH | A/SA516 – Grade 70 | – |
To improve resistance to hydrogen damage, carbon-manganese steel with regulated sulfur and phosphorus content is used in the production of NACE plates. Depending on the needs of the client, the plates usually meet standards like API 5L or ASTM A516 Grade 60/70. They have outstanding ductility, high toughness, and tensile strength. These plates provide exceptional weldability and impact resistance, with yield strengths ranging from 260 to 485 MPa and tensile strengths between 415 and 620 MPa. Long-term performance in demanding, corrosive environments is guaranteed by their mechanical integrity.
In industries where corrosion and crack resistance are essential, NACE plates are widely used. In the oil, gas, and petrochemical industries, they are perfect for creating pipelines, storage tanks, heat exchangers, and pressure vessels. NACE plates are essential for the longevity and safety of chemical processing facilities, refineries, and offshore drilling platforms in hydrogen sulfide (H₂S) environments. These plates are also utilized in heavy industrial machinery that is subjected to extreme environments and in maritime applications. They are a popular option for crucial engineering projects because of their capacity to preserve structural integrity in the face of extreme heat and pressure.
In Naypyidaw, Myanmar, Naing Steel is a reputable producer and supplier of high-quality NACE plates. For use in extremely corrosive environments, our NACE-certified steel plates are designed to satisfy the exacting requirements established by the National Association of Corrosion Engineers (NACE). These plates are perfect for the petrochemical, offshore, and oil and gas sectors because of their unique design, which prevents sulfide stress corrosion and hydrogen-induced cracking (HIC). Naing Steel guarantees superior quality, longevity, and adherence to global standards, offering customers dependable steel solutions that perform remarkable under the most trying circumstances.
SA 516 GR.60/70N NACE Plates are pressure vessel plates with high strength that are suited for application in severe environments, especially in hydrogen sulfide-exposed industries. The plates adhere to NACE MR 0103/0175 standards to provide superior sulfide stress cracking resistance. They have Carbon (≤0.28%), Manganese (0.79-1.30%), Silicon (0.13-0.45%), Phosphorus (≤0.025%) and Sulfur (≤0.015%) which offer better toughness and durability. Normalized for better mechanical properties, these plates are extensively utilized in the oil and gas, petrochemical, and power generation sectors.
| Grade | ASME SA 516 GR.60/70N Boiler Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| 0.18 | 0.4 | 0.95/1.50 | 0.015 | 0.008 | 0.02 (Min) | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
| BS1501-224-490A/B | EN10028 P355GH | A/SA516 – Grade 70 | – |
To improve resistance to hydrogen damage, carbon-manganese steel with regulated sulfur and phosphorus content is used in the production of NACE plates. Depending on the needs of the client, the plates usually meet standards like API 5L or ASTM A516 Grade 60/70. They have outstanding ductility, high toughness, and tensile strength. These plates provide exceptional weldability and impact resistance, with yield strengths ranging from 260 to 485 MPa and tensile strengths between 415 and 620 MPa. Long-term performance in demanding, corrosive environments is guaranteed by their mechanical integrity.
In industries where corrosion and crack resistance are essential, NACE plates are widely used. In the oil, gas, and petrochemical industries, they are perfect for creating pipelines, storage tanks, heat exchangers, and pressure vessels. NACE plates are essential for the longevity and safety of chemical processing facilities, refineries, and offshore drilling platforms in hydrogen sulfide (H₂S) environments. These plates are also utilized in heavy industrial machinery that is subjected to extreme environments and in maritime applications. They are a popular option for crucial engineering projects because of their capacity to preserve structural integrity in the face of extreme heat and pressure.
In Naypyidaw, Myanmar, Naing Steel is a reputable producer and supplier of high-quality NACE plates. For use in extremely corrosive environments, our NACE-certified steel plates are designed to satisfy the exacting requirements established by the National Association of Corrosion Engineers (NACE). These plates are perfect for the petrochemical, offshore, and oil and gas sectors because of their unique design, which prevents sulfide stress corrosion and hydrogen-induced cracking (HIC). Naing Steel guarantees superior quality, longevity, and adherence to global standards, offering customers dependable steel solutions that perform remarkable under the most trying circumstances.
SA 516 GR.60/70N NACE Plates are pressure vessel plates with high strength that are suited for application in severe environments, especially in hydrogen sulfide-exposed industries. The plates adhere to NACE MR 0103/0175 standards to provide superior sulfide stress cracking resistance. They have Carbon (≤0.28%), Manganese (0.79-1.30%), Silicon (0.13-0.45%), Phosphorus (≤0.025%) and Sulfur (≤0.015%) which offer better toughness and durability. Normalized for better mechanical properties, these plates are extensively utilized in the oil and gas, petrochemical, and power generation sectors.
| Grade | ASME SA 516 GR.60/70N Boiler Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| 0.18 | 0.4 | 0.95/1.50 | 0.015 | 0.008 | 0.02 (Min) | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
| BS1501-224-490A/B | EN10028 P355GH | A/SA516 – Grade 70 | – |
To improve resistance to hydrogen damage, carbon-manganese steel with regulated sulfur and phosphorus content is used in the production of NACE plates. Depending on the needs of the client, the plates usually meet standards like API 5L or ASTM A516 Grade 60/70. They have outstanding ductility, high toughness, and tensile strength. These plates provide exceptional weldability and impact resistance, with yield strengths ranging from 260 to 485 MPa and tensile strengths between 415 and 620 MPa. Long-term performance in demanding, corrosive environments is guaranteed by their mechanical integrity.
In industries where corrosion and crack resistance are essential, NACE plates are widely used. In the oil, gas, and petrochemical industries, they are perfect for creating pipelines, storage tanks, heat exchangers, and pressure vessels. NACE plates are essential for the longevity and safety of chemical processing facilities, refineries, and offshore drilling platforms in hydrogen sulfide (H₂S) environments. These plates are also utilized in heavy industrial machinery that is subjected to extreme environments and in maritime applications. They are a popular option for crucial engineering projects because of their capacity to preserve structural integrity in the face of extreme heat and pressure.
In Naypyidaw, Myanmar, Naing Steel is a reputable producer and supplier of high-quality NACE plates. For use in extremely corrosive environments, our NACE-certified steel plates are designed to satisfy the exacting requirements established by the National Association of Corrosion Engineers (NACE). These plates are perfect for the petrochemical, offshore, and oil and gas sectors because of their unique design, which prevents sulfide stress corrosion and hydrogen-induced cracking (HIC). Naing Steel guarantees superior quality, longevity, and adherence to global standards, offering customers dependable steel solutions that perform remarkable under the most trying circumstances.
SA 516 GR.60/70N NACE Plates are pressure vessel plates with high strength that are suited for application in severe environments, especially in hydrogen sulfide-exposed industries. The plates adhere to NACE MR 0103/0175 standards to provide superior sulfide stress cracking resistance. They have Carbon (≤0.28%), Manganese (0.79-1.30%), Silicon (0.13-0.45%), Phosphorus (≤0.025%) and Sulfur (≤0.015%) which offer better toughness and durability. Normalized for better mechanical properties, these plates are extensively utilized in the oil and gas, petrochemical, and power generation sectors.
| Grade | ASME SA 516 GR.60/70N Boiler Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| 0.18 | 0.4 | 0.95/1.50 | 0.015 | 0.008 | 0.02 (Min) | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
| 485-620 (70-90) | 260 (38) | 17 | 21 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
| BS1501-224-490A/B | EN10028 P355GH | A/SA516 – Grade 70 | – |
To improve resistance to hydrogen damage, carbon-manganese steel with regulated sulfur and phosphorus content is used in the production of NACE plates. Depending on the needs of the client, the plates usually meet standards like API 5L or ASTM A516 Grade 60/70. They have outstanding ductility, high toughness, and tensile strength. These plates provide exceptional weldability and impact resistance, with yield strengths ranging from 260 to 485 MPa and tensile strengths between 415 and 620 MPa. Long-term performance in demanding, corrosive environments is guaranteed by their mechanical integrity.
In industries where corrosion and crack resistance are essential, NACE plates are widely used. In the oil, gas, and petrochemical industries, they are perfect for creating pipelines, storage tanks, heat exchangers, and pressure vessels. NACE plates are essential for the longevity and safety of chemical processing facilities, refineries, and offshore drilling platforms in hydrogen sulfide (H₂S) environments. These plates are also utilized in heavy industrial machinery that is subjected to extreme environments and in maritime applications. They are a popular option for crucial engineering projects because of their capacity to preserve structural integrity in the face of extreme heat and pressure.
Naing Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Naypyidaw, Myanmar.
Copyright 2025 Naing Steel. All rights reserved
